Webstore Visit our webstore for
great Victron deals
More Info
Home > IndependentElectric Power > Victron Energy 2011/01/26
  Below is a summary of the Victron product range.
For more information or to view the full Victron product range, Click Here.
MultiPlus.jpg
MultiPlusCompact.jpg

Phoenix MultiPlus 12 / 24 / 48 Volt
Phoenix MultiPlus Compact 12 / 24 Volt

All features of a sine wave inverter and charger in one compact enclosure.
UPS functionality: seamless transfer from external AC to inverter supply.

A unique AC power management system will prevent overload of a limited AC source. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery: where peak power is often equired only for a limited period, the Phoenix MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery.

Models range from 800VA to 3000VA per module.
Scalable: any number of units can be paralleled in single phase, split phase and three phase configuration.


More info on the Phoenix MultiPlus

Inverter.jpg

Phoenix Inverter 12 / 24 / 48 Volt
Phoenix Inverter Compact 12 / 24 Volt

Pure sinewave output, high peak power and high efficiency.
Combined high frequency and line frequency technologies ensure the best of both worlds.

Models range from 150VA to 3000VA per module.
Scalable: any number of units can be paralleled in single phase, split phase and three phase configuration.

More info on the Phoenix Inverter

BluePower.jpg

Blue Power Charger 12 / 24 Volt

Completely encapsulated: waterproof, shockproof and ignition protected.
Water, oil or dirt will not damage the Blue Power charger. The casing is made of cast aluminium and the electronics are molded in resin.

More info on the Blue Power Charger

Skylla.jpg

Skylla TG 24 / 48 Volt

One full rated output and one 4 Amp output.
Charge voltage can be precisely adjusted to suit any battery system. The input for the charger is 230V at 50/60HZ.
Charge voltage can be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance.
An external sensor allows to measure battery temperature and compensate charge voltage accordingly.

More info on the Skylla Charger

PhoenixCharger.jpg

Phoenix Charger 12 / 24 Volt

Adaptive 4-stage charge characteristic: bulk - absorption - float - storage.
Two full rated outputs and one 4 Amp output.

Universal input 90-265V, 50/60Hz.

The Phoenix charger features a microprocessor controlled adaptive battery management system that can be preset to suit different types of batteries. The adaptive feature will automatically optimise the charge process
relative to the way the battery is being used.

More info on the Phoenix Chargers

Orion.jpg

Orion DC / DC Converters : 12 / 24 / 48 / 96 Volt

Possibly the widest range on the market! Both isolated and not isolated models are available.
An ever-increasing amount of electric equipment is being used on vehicles and boats. Because most low-voltage equipment, such as navigation and radio equipment, mobile telephones or car hi-fi systems, is designed for 12 Volts, Victron Energy supplies DC/DC converters which deliver a stable 12 Volt supply from a 24 Volt system.

Next to converters from 24 V to 12 V, a wide range of other models is available.

More info on the Orion DC/DC Convertors

BMV.jpg

BMV-501 Battery Monitor

Identifying exactly how much energy is left in a battery is not easy.
In order to keep an accurate record of how much energy is stored in a battery it is necessary to keep account of all the factors that affect it and this is a complex matter.

Once a reliable reading of the state of charge of the battery is available, however, life starts to get an awful lot less complicated. No more nasty surprises with batteries going flat unexpectedly, and it becomes possible to manage batteries on fact rather than guess work. It is amazing how much power you can have with a little extra knowledge!

VEnet_VPN.jpg
VE.Net: ultimate power management and control
Nothing should be complicated and it is Victron Energy’s aim to make life on board straight forward as well as ensuring your maximum comfort. To enjoy the benefits of having power anywhere and any time you need a sophisticated system but this would be self defeating if you needed an engineering degree to make it all work. VE.Net gives you clear and simple information and control of your systems, even when you are not there, with the optional GSM/GPS Module!

More info on the VE.net System

MultiControl.jpg
Phoenix Multi Control
This is a remote control and monitoring panel for the Phoenix Multi/MultiPlus. In addition, the remote panel also offers PowerControl and PowerAssist, (simply by setting a maximum AC current with a 0 to 16A rotary knob), thus preventing the shore supply or a genset from being overloaded. The brightness of the LED’s is automatically reduced during night time. Connection to the Multi is with a standard UTP – cable.
BatteryAlarm.jpg
Battery Alarm
An excessively high or low battery voltage is indicated by an audible and visual alarm, and a relay for remote signalling.
  
Latest Product WGS_BuiltIn_Thumb.jpg Wireless Remote
Genset Stopper Unit
More Info
Showcase ASU-6D1_ConnectionBox_Thumb.jpg Made and Designed
In-House
More Info
Other Products Victron_MultiPlusCompact_Thumb.jpg
More Info